LIVE WITHIN 90 MINUTES
A grip on your energy consumption.
Tomorrow measures your main meter and machines, flags peaks and phantom loads, and turns that into targeted savings, on average 14% lower energy costs.
In short
What we do for you
Consumption today
What we do
Live measurement of every machine
On the main meter and every machine group. We analyse peaks and anomalies and send an alert right away: preventing expensive peaks and unexpected downtime.
Consumption per machine
How we do it
Sensors installed within an hour
Plug-and-play current sensors, mounted by your own electrician or our team. No production stop, no rebuild.
Energy costs per month
What it delivers
14% lower energy costs on average
Less phantom load, no expensive peaks, and savings advice based on your own data.
Numbers
What it delivers
average energy savings
first-year ROI
installation time
connected companies
less consumption per year
saved per year
At NTB's concrete plant we found a serious leakage load: the silo valve heating stayed on through the weekend because of faulty wiring. One alert and one fix later, NTB saves over 70 MWh and around € 10,000 a year.
NTB concrete plant
The problem
Three costs you can't see today
Consumption outside production hours
Phantom loads
Machines that should be idle at night and on weekends keep consuming. Invisible on the annual bill, obvious at machine level.
Highest peak this week
Peak charges
One simultaneous peak sets your grid tariff. Without real-time measurement you only find out afterwards.
Metering points today
No per-machine insight
The smart meter shows one total. Which machine consumes what, and where the savings are, stays invisible.
How it works
From the grid to savings, in three steps
Connect your main meter
Linked digitally with DynaSense. Arranged online in minutes, no engineer and no waiting.
- Meter-operator independent
- 15-minute interval data
- Arranged online, no engineer
Scroll to follow the power ↓
For a more durable industry.
Tomorrow helps organisations reduce waste, lower emissions, and build sustainable energy strategies that last.
The platform
One platform, everything in it
See live what every meter is doing
Track electricity, gas, and solar, all in one dashboard with live data streaming.
| Name | Contracted | Current Peak | Usage | Peaks >80% |
|---|---|---|---|---|
▾Van Dijk Metaal3 locaties | 510 kW | 382 kW | 85% | 15x |
Fabriek WestProductie | 230 kW | 195 kW | 85% | 12x |
Fabriek OostProductie | 180 kW | 142 kW | 79% | 3x |
MagazijnOpslag | 100 kW | 45 kW | 45% | - |
▾Terrein Zuid2 locaties | 340 kW | 289 kW | 85% | 8x |
Pand AKantoor | 200 kW | 174 kW | 87% | 6x |
Pand BLab | 140 kW | 115 kW | 82% | 2x |
An alert the moment something deviates
Clamp & go
Self-install without downtime.
Peak detection
Understand your energy profile with sub-monitoring per machine or circuit. See which processes peak together and adjust before the grid operator steps in.
Split costs easily across tenants
| Description | Usage | Rate | Amount |
|---|---|---|---|
Energy consumption Meter: SM-001 | 4.280 kWh | 0,40/kWh | 1.712,00 |
Get more from your solar power
Total Solar Production
3.150 kWh
Run the numbers
What does it get you?
Slide to your situation and see immediately what monitoring delivers.
After that from € 20 per measuring point per month, plus € 50 per router. One router is usually enough.
Expected savings per year
€14,000
Quickscan one-off
€3,000
Subscription per year
€3,000
First-year ROI
2.3x
Payback period
5 months
Your input, our one measured number: an average 14% saving across our customers. Every installation starts with a one-month quickscan: € 3,000 including 10 sensors and a router, € 100 per extra sensor. After that you decide whether the sensors stay.
Book callPricing
What it costs
- Quickscan
- One month of measuring, including ten sensors and a router.
- € 3,000one-off
- Extra sensor or router
- Anything beyond the ten sensors and the router from the quickscan.
- € 100one-off, each
- Measuring point
- Ongoing monitoring per machine or group, after the quickscan.
- € 20per month
- Router
- Connects the sensors to the dashboard. One is usually enough.
- € 50per month
After the quickscan you decide whether the sensors stay. Installation runs through our network of installers and is quoted separately.